Wood Bleach – 2 Parts Solution

The Wood Bleach solution is one of the latest formulation aiming for removing the aging mark on the wood surface. An aged wood surface normally will cover with contaminants or unwanted faded paint, those unwanted layer shall be cleaned prior to refurbish.

The 2 parts Wood Bleach mainly serve for above purpose. The part A, or the 1st part is the conditional solution. The Part A solution will remove the contaminant, unwanted stain mark from the wood surface. Whereby the Part B, or the 2nd part, is mainly aim for bleaching purpose.

A 2 part wood bleach solution gives a good performance for bringing back the wood nature colour.

Application for Wood Bleach

These 2 parts wood bleach solution come in the combination of Part A and Part B. Both are dedicated formulated in order to accomplish their purpose. The solution is well formulated to bleaching the wood surface ,

• Part A. The main purpose is wood surface preparation.
  Apply a layer of Wood Bleach Part A on the wood surface. The cleaner will break in the outer wood layer and removed the contaminant deposit on the wood surface. Once the outer aged-layer being removed, the bleaching process becomes more convenient.
  You could apply some scrubbing on the wood surface in order to expedite the surface break in. Apply the scrubbing with a nylon brush or a sponge.
• Part B. Bleach the “fresh” surface.
  After the wood surface being break in by Part A solution, only apply Part B solution on the wood surface after the Part A is dried-out. Apply a layer of Wood Bleach Part B on the prepared surface. The bleach will whitening the wood surface and resume the surface with nature wood texture and appearance.

Download thew Wood Beach Technical Data Sheet here.

Direction of Use

Let us summarize the steps for bleaching a wood with our 2 parts wood bleach solution.

• Step 1. Pour an adequate portion of Part A solution into a glass or plastic container.
• Step 2. Apply the Part A solution on the wood surface with either nylon brush of sponge. Perform some scrubbing for expedite the process. We strongly recommend the wood could be tilted with certain angle during the scrubbing process. This is to ensure the Part A solution will flow away without causing watermark left over on the wood surface.
• Step 3. Let the wood surface air dry.
• Step 4. Pour adequate Part B solution om to a glass container. DO NOT USE metal container.
• Step 5. Apply the Part B on the wood surface, let it air dry.
• Step 6. Rinse the wood surface with fresh water to minimize the residual.
• Step 7. Air dry the wood and sit back to experience the original wood texture.

Features

The Wood Bleach solution is designed to achieve the below purpose.

1. Restores the natural beauty of wood.
2. Removes aged dirt and contaminants.
3. Prepares the wood surface for further treatment.

It breaks in the wood surface, remove the contaminant as well as removing the aged-trace on the wood without sacrificing the wood nature. We are able to carry out subsequent process

Basic Properties

Wood Bleach Solution – Part A

• Colour: Water clear solution
• pH: 14
• Odour: Sweat
• Solubility in Water: Good

Wood Bleach Solution: Part B

• Colour: Water clear solution
• pH:
• Odour: Pool smell
• Solubility in Water: Good

Precautions Statement and Handling Guideline

Both Part A and Part B have to handle with extra care. User has to wear appropriate PPE attire during the application process. The PPE shall include:

• Eyes goggle
• Glove
• Apron

Besides, below are the basic requirement some basic precautions while handle these 2 part of solution.

• Wear a pair of rubber gloves and eye goggles during the handling process.
• Avoid getting contact with skin or eyes.
• While solution spill off, flush the affected areas with plenty of water.
• Do not ingest.
• Stay away from children.

Feel free writing to us to understand more about our Wood Bleach product.